Materials Science

All Items

• Age-dependent trends in compressive strength of concrete incorporating fly ash

  Sungat Akhazhanov, Gulshat Tleulenova, Sabit Karaulov, Shyngys Zharassov, Alisher Mukhamejan

  0046

• Alkali-activated composites with synthetic fibers and recycled aggregates: a study of mechanical properties

  Ramazan Cingi, Bolat Balapanov, Mucteba Uysal, Beyza Fahriye Aygun, Sarsenbek Montayev, Orhan Canpolat

  0058

• Application of micro and nano modifying additives in road construction materials

  Rassul Tlegenov, Marat Konkanov, Assel Jexembayeva, Kinga Korniejenko

  0066

• Approximative approach to optimize concrete foaming concentration in two stage foaming

  Rauan Lukpanov, Duman Dyussembinov, Zhibek Zhantlessova, Aliya Altynbekova, Anatolij Smoljaninov

  0041

• Binding properties of synthesized CS glasses activated by alkaline components

  Bakhytzhan Sarsenbayev, Sultan Auyesbek, Meiram Begentayev, Nuraly Sarsenbayev, Erkin Khaltursunov, Gaukhar Sauganova

  0064

• Complex additive for improving the strength properties of heavy concrete based on industrial waste

  Rauan Lukpanov, Duman Dyussembinov, Serik Yenkebaev, Denis Tsygulyov, Murat Karacasu

  0067

• Comprehensive overview of the macroscopic thermo-hydro-mechanical behavior of saturated cohesive soils

  Victor Kaliakin, Meysam Mashayekhi

  0071

• Concretes based on technogenic wastes formed during the mechanical processing of carbonate rocks

  Raushan Nurymbetova, Rayimberdy Ristavletov, Nikolay Suzev, Elmira Kalshabekova, Ruslan Kudabayev

  0061

• Determination of the softening temperature of bitumen with different modifiers

  Zhanar Kusbergenova, Gulmira Baizakova, Aleksej Aniskin

  0028

• Development of composition of fine-grained concrete based on ash-and-slag wastes for additive technology of manufacturing small architectural forms

  Zulfiya Aubakirova, Murat Rakhimov, Galiya Rakhimova, Monika Kulisz, Tymarkul Muzdybayeva

  0069

• Eco-efficient composite cements and arbolite using burnt clay shale from the Mynaral deposit

  Baurzhan Amiraliyev, Kuanysh Imanaliyev, Zhambul Aymenov, Erzhan Kuldeyev, Bakhrom Tulaganov

  0087

• Effect of curd whey on the shrinkage and water absorption of fired clay building ceramics

  Sayagul Zhaparova, Nurzhan Kospanov, Aliya Aldungarova, Javier Rodrigo-Ilarri, Zulfiya Bayazitova

  0107

• Effect of glass waste on ceramics and concrete production

  Danara Mazhit, Zhanar Kaliyeva, Daniyar Bazarbayev

  0075

• Effect of heat treatment of expanded polystyrene concrete on its compressive strength

  Murat Rakhimov, Galiya Rakhimova, Tatyana Samoilova, Nurlan Zhangabay

  0059

• Effect of modifiers and mineral additives from industrial waste on the quality of aerated concrete products

  Yerlan Sabitov, Duman Dyussembinov, Daniyar Bazarbayev

  0010

• Effect of paraffine wax on the mobility of injection cement mortars

  Zhibek Zhantlessova, Rauan Lukpanov, Duman Dyussembinov, Serik Yenkebayev, Denis Tsygulyov, Murat Karacasu

  0080

• Effect of polypropylene fiber length on the mechanical properties, frost resistance, and microstructure of silica fume-modified self-compacting concrete

  Assel Ospanova, Evgeniya Tkach, Tolebi Myrzaliyev

  0106

• Effect of waste glass and silica fume additions on the properties of fired clay ceramics

  Zhanar Zhumadilova, Maratbek Zhuginissov, Ruslan Nurlybayev, Yelzhan Orynbekov, Aigerim Tolegenova, Adlet Zhagifarov

  0099

• Effect of waste glass powder particle size, content, and compaction pressure on the properties of autoclaved silicate brick

  Sarsenbek Montayev, Bolatbek Sakhiev, Sabit Zharylgapov, Ainur Montayeva

  0098

• Enhancing dry mix mortar strength with natural fillers and polymers

  Khrystyna Moskalova, Aleksej Aniskin, Matija Orešković, Željka Kovač

  0039

• Evaluation of tensile strength characteristics of geosynthetic materials designed to ensure embankment stability

  Rauan Lukpanov, Duman Dyussembinov, Zhibek Zhantlesova, Aigerim Yenkebayeva

  0036

• Experimental study on physical-mechanical characteristics of steel fiber reinforced concrete with worn rope fibers

  Dias Kazhimkanuly, Valeriy Chernavin

  0035

• Exploring the capabilities of 3D Printer S-6045 for additive manufacturing of street furniture

  Gulnaz Zhairbaeva, Zulfiya Aubakirova, Yana Ivashina, Alexandr Soldun, Alina Makienko

  0033

• Features of the production of cement asphalt concrete using fuel ash

  Kapar Aryngazin, Mariya Zhulasheva, Assem Abisheva, Aygerim Takirova, Dina Aligozhina

  0012

• Features of using modified bitumen in road construction

  Aigerim Syzdykova, Aigul Zhakyp, Assel Tulebekova

  0007

• Fine-grained concrete for repair and restoration based on complex modifiers

  Sarsenbek Kozhasov, Aigul Kozhas

  0038

• Fine-grained self-compacting concrete with polyfunctional additive and enhanced performance properties

  Zhanar Zhumadilova, Assel Kanarbay, Daniyar Akhmetov, Assel Aldigaziyeva

  0089

• Fractal model of the strength of lightweight concrete based on volcanic tuff taking into account the scale effect

  Yerlan Khamza, Vladimir Selyaev, Maratbek Zhuginissov, Zhanar Zhumadilova

  0063

• Heat-resistant concretes based on cement binders and waste from the metallurgical industry

  Samal Akimbekova, Lyazat Aruova, Zhuzim Urkinbayeva, Marek Nykiel

  0068

• Hyper-pressing technologies and properties of construction products: a review

  Ruslan Nurlybayev, Maratbek Zhuginissov, Yelzhan Orynbekov, Yerlan Khamza, Yerlan Kushekov

  0109

• Improvement of road infrastructure on the example of the Center-South transport corridor of the Akchatau-Akzhal section

  Rima Kiknadze, Assel Mukhamejanova

  0044

• Improvement of the crack resistance of reinforced concrete sleepers using modified concretes

  Ilyas Abdraimov, Kuttybay Musa, Ibrahim Kasimov, Mariya Sailygarayeva, Vladislav Pak, Yerkyn Turarov

  0078

• Investigation of the properties of fly ash and slag-based geopolymer concrete containing waste glass aggregates

  Zhuzimkul Urkinbayeva, Assel Jexembayeva, Marat Konkanov, Samal Akimbekova, Lailya Zhaksylykova, Tariq Umar

  0081

• Low thermal conductivity silica ceramics based on diatomite modified with loam

  Azamat Taskaliev, Bekbulat Shakeshev, Kanat Narikov, Beksultan Idrisov, Kamar Dzhumabaeva

  0091

• Mechanical responses of Ili saline loess to EICP treatment under variable salinity and freeze-thaw conditions

  Kaixin Shi, Li Ma, Xuejun Liu

  0102

• Microstructural transition and densification behavior of modified soil: a quantitative SEM study

  Assel Tulebekova, Natalya Ryvkina, Dauren Yessentay, Akmaral Yeleussinova

  0095

• Mineral powder based on basalt insulation waste for asphalt concrete

  Duman Dyusembinov, Rauan Lukpanov, Adiya Zhumagulova, Assel Jexembayeva, Beksultan Chugulyov

  0056

• Modern trends in the development of the construction industry in the production of building materials

  Aliya Aldungarova, Kapar Aryngazin, Vladimir Larichkin, Assem Abisheva, Kamilla Alibekova

  0003

• On-site pilot testing of maturity sensors in conjunction with ambient condition monitoring device to get an insight into the concrete strength gain process

  Yelbek Utepov, Shyngys Zharassov

  0019

• Optimizing sodium sulfonate dosage in non-autoclaved aerated concrete: effects on pore stability, strength, and abrasion resistance

  Nurlan Bekkaliev, Yerlan Sabitov

  0094

• Performance of maturity method for estimation of concrete strength based on cubic specimens

  Rauan Lukpanov, Shyngys Zharassov, Timoth Mkilima, Aliya Aldungarova

  0008

• Physicochemical properties of silica fume and fly ash from Tau-Ken Temir LLP and Pavlodar CHP for potential use in self-compacting concrete

  Erzhan Kuldeyev, Zhanar Zhumadilova, Adlet Zhagifarov, Aigerim Tolegenova, Mussa Kuttybay, Abzal Alikhan

  0076

• Potential applicability of tailings as fine aggregate for concrete paving slabs

  Zulfiya Aubakirova, Aldiyar Теmirbekov, Monika Kulisz, Gulnaz Zhairbaeva

  0024

• Practical experience with modified bitumen and bituminous binders

  Zhanar Kusbergenova, Aizhan Zhankina, Timoth Mkilima

  0013

• Prediction of compressive strength and density of aerated ash concrete

  Darya Anop, Olga Rudenko, Vladimir Shevlyakov, Zulfiya Aubakirova, Nikolai Soshnikov, Meiram Begentayev

  0074

• Properties of modified bitumen in road construction

  Zhanbolat Shakhmov, Adiya Zhumagulova, Samal Kosparmakova, Aru Kozhahmet , Jakharkhan Kabdrashit

  0040

• Research of foam concrete components in the regional production conditions of Nur-Sultan

  Rauan Lukpanov, Duman Dyussembinov, Aliya Altynbekova, Zhibek Zhantlesova

  0023

• Research of foam concrete quality by two-stage foam injection method in comparison with classical foam concrete

  Rauan Lukpanov, Duman Dyussembinov, Aliya Altynbekova, Zhibek Zhantlesova, Tattigul Seidmarova

  0052

• Research of technological parameters for producing thermal insulating arbolite based on developed slag alkali binders

  Kuanysh Imanaliyev, Baurzhan Amiraliyev, Kenzhebek Akmalaiuly, Erzhan Kuldeyev, Elmurad Yunusaliyev, Zhambul Aymenov

  0065

• Research on the effect of microsilica on the properties of the cement-sand mixture

  Rauan Lukpanov, Duman Dyussembinov, Aliya Altynbekova, Zhibek Zhantlesova

  0027

• Study of cement binders applicable for modified cast-in-place concrete

  Khaidi Khonjo, Yerzhan Toleuov, Aizere Azbergenova, Akkumis Urumbayeva

  0022

• Study of clay raw materials with Korolek technogenic waste for the production of ceramic bricks

  Almira Kashetova, Aigul Kozhas

  0050

• Study of the pore structure of foam concrete using a two-stage foaming method

  Rauan Lukpanov, Duman Dyussembinov, Aliya Altynbekova, Zhibek Zhantlessova, Anatolij Smoljaninov

  0047

• Study on the influence of polycarboxylic acid water-reducing agent on the performance of gypsum-modified mud mortar

  Sawulet Bekey, Wumeng Liu, Qing Wang, Wenze Wang, Jingzheng Mi

  0103

• Testing of cement stone modified with an additive based on industrial waste

  Daniyar Bazarbayev, Adiya Zhumagulova, Danagul Kadyrkhanova

  0026

• The influence of opoka mineral additive on the physico-mechanical properties of gas-ceramics based on low-plasticity clay

  Sarsenbek Montayev, Ainur Montayeva

  0086

• The influence of stabilizers on the strength characteristics of soils in the Western Kazakhstan region

  Mariya Smagulova, Duman Dyussembinov, Jeong Ku Kang, Adiya Zhumagulova, Manarbek Zhumamuratov

  0084

• Use of recycled waste in the production of building materials

  Kapar Aryngazin, Assem Abisheva

  0020

• Utilization of waste glass, ceramic scraps, and slag in manufacturing ceramic building materials

  Zhanar Kaliyeva, Danara Mazhit, Gabit Satmagambetov, Kinga Korniejenko

  0092

• Utilization of water treatment plant sludge in concrete mix

  Kairat Ospanov, Dariusz Andraka, Manat Alzhigitova, Bakhtiyar Kabylbekov, Gulbanu Mukhanova

  0083

• Utilizing granulated blast furnace slag as an alternative cement binder

  Akmaral Sadirbayeva, Sarsenbek Kozhasov, Aigul Kozhas, Olzhas Kulazhanov

  0042

• Vibro-pressed concrete for wall blocks based on lightweight expanded clay aggregate obtained with the addition of oil sludge

  Roza Narmanova, Kylyshbai Bissenov, Nargul Saktaganova, Sergiy Lyubchyk, Nurlybek Kelmagambetov

  0090