Research of technological parameters for producing thermal insulating arbolite based on developed slag alkali binders

Authors

DOI:

https://doi.org/10.54355/tbus/4.3.2024.0065

Keywords:

arbolite, rice husks, strength, slag-alkali binders, binders, slag-alkaline arbolite

Abstract

The paper presents the results of studies of an arbolite block made from rice husks. Granulated blast furnace slag of «Qarmet» OJSC and Dzhambul phosphorus slag were used as slag-alkali binders. The resulting material was examined for basic thermal and mechanical characteristics. As a result, it was found that the adhesion strength of the developed slag-alkali binders with rice husks exceeds the adhesion strength of Portland cement with the latter by 1.40 - 4.08 times, where slag-alkaline arbolite was obtained based on rice husks with an average density of 450-800 kg/m3 and a strength of 0.6 – 3.41 MPa. The frost resistance of the developed wood concrete compositions ranges from 15 to 30 cycles of alternating freezing and thawing. The results of this study can be used in the future when designing energy-efficient buildings.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

T. Samoilova, M. Rakhimov, G. Rakhimova, and N. Zhangabay, “Effect of heat treatment of expanded polystyrene concrete on its compressive strength,” Technobius, vol. 4, no. 2, p. 0059, Jun. 2024, doi: 10.54355/tbus/4.2.2024.0059.

R. Lukpanov, D. Dyussembinov, A. Altynbekova, Z. Zhantlesova, and T. Seidmarova, “Research of foam concrete quality by two-stage foam injection method in comparison with classical foam concrete,” Technobius, vol. 4, no. 1, p. 0052, Mar. 2024, doi: 10.54355/tbus/4.1.2024.0052.

N. Zhangabay, S. Buganova, I. Baidilla, and A. Tagybayev, “MODELING OF THERMAL RESISTANCE OF THE DEVELOPED EXTERNAL ENCLOSING STRUCTURES WITH AN AIR LAYER,” Bulletin of Kazakh Leading Academy of Architecture and Construction, vol. 88, no. 2, pp. 178–191, Jun. 2023, doi: 10.51488/1680-080X/2023.2-19.

B. Martínez, V. Mendizabal, M. B. Roncero, E. Bernat-Maso, and L. Gil, “Towards sustainable building solutions: Development of hemp shiv-based green insulation material,” Constr Build Mater, vol. 414, p. 134987, Feb. 2024, doi: 10.1016/j.conbuildmat.2024.134987.

M. Dlimi, R. Agounoun, I. Kadiri, R. Saadani, and M. Rahmoune, “Thermal performance assessment of double hollow brick walls filled with hemp concrete insulation material through computational fluid dynamics analysis and dynamic thermal simulations,” e-Prime - Advances in Electrical Engineering, Electronics and Energy, vol. 3, p. 100124, Mar. 2023, doi: 10.1016/j.prime.2023.100124.

H. G. Şahin, A. Mardani, S. Özen, and A. Emin, “Utilization of high-range water reducing admixture having air-entraining agents in cementitious systems,” Journal of Building Engineering, vol. 64, p. 105565, Apr. 2023, doi: 10.1016/j.jobe.2022.105565.

A. K. Matyeva, “MANUFACTURE OF MODIFIED ARBOLIT FROM LOCAL RAW MATERIALS: OPTIMIZATION OF COMPOSITION AND PROPERTIES OF RAW MATERIAL COMPONENTS,” The Russian Automobile and Highway Industry Journal, vol. 16, no. 3, pp. 352–365, Jul. 2019, doi: 10.26518/2071-7296-2019-3-352-365.

N. Zhangabay, D. Chepela, T. Tursunkululy, A. Zhangabay, and A. Kolesnikov, “Analysis of the effect of porosity on thermal conductivity with consideration of the internal structure of arbolite,” Construction materials and products, vol. 7, no. 3, pp. 4–4, May 2024, doi: 10.58224/2618-7183-2024-7-3-4.

A. N. Yagubkin, V. V. Bozylev, and D. S. Zelenkevich, “Vliyaniye vlazhnosti na vodostoykost’ i dolgovechnost’ arbolitovykh izdeliy,” Bulletin of Polotsk State University, vol. 16, pp. 60–63, 2012.

A. S. Kurtaev and Z. A. Estemesov, Kompozitsionnyye materialy na osnove neorganicheskikh vyazhushchikh veshchestv. Kiev: IMP, 1998.

TU-822-11-78 Rice husk. 1979, p. 7.

GOST 310.1-76 Cements. Methods for determining grinding fineness. 1976.

GOST 310.2-76 Cements. Test methods. 1976.

GOST 310.3-76 Cements. Methods for determining normal density, setting time and uniformity of volume change. 1976.

GOST 310.4-76 Cements. Methods for determining bending and compressive strength. 1976.

GOST 25820-83 Concrete. Methods for determining water absorption. 1983.

Downloads

Published

2024-09-30

How to Cite

Imanaliyev, K., Amiraliyev, B., Akmalaiuly, K., Kuldeyev, E., Yunusaliyev, E., & Aymenov, Z. (2024). Research of technological parameters for producing thermal insulating arbolite based on developed slag alkali binders. Technobius, 4(3), 0065. https://doi.org/10.54355/tbus/4.3.2024.0065

Issue

Section

Articles

Categories