Study of cement binders applicable for modified cast-in-place concrete
DOI:
https://doi.org/10.54355/tbus/2.3.2022.0022Keywords:
CMC, cement binder, Portland cement, compressive strength, raw materialsAbstract
This article presents the results of experimental studies of cement binder from local raw material bases optimal for the production of cast modified concrete (CMC). Having a special self-compacting nature, as well as a sensitive cost-effectiveness for the Kazakhstan concrete mixtures manufacturer, this type of concrete requires the use of cement with stable physical and technical characteristics. The study conducted an analysis of the nomenclature of local bases of cement raw materials, testing for cement fineness of Portland cement PC 400 D20 and compressive strength. It is revealed that in Kazakhstan there is a fairly wide range of cement products available with and without additives, produced by dry and wet method. Samples of Portland cement with mineral additives were taken for testing. According to the results of tests, the best indicators of grinding fineness 94.65% and compressive strength on 28 days 42.8 MPa were obtained for Portland cement with mineral additives of Bukhtarminskaya cement company LLP, produced by wet method.
Downloads
Metrics
References
The Effect of Low-Modulus Plastic Fiber on the Physical and Technical Characteristics of Modified Heavy Concretes Based on Polycarboxylates and Microsilica / D.A. Akhmetov, Y.V. Pukharenko, N.I. Vatin, S.B. Akhazhanov, A.R. Akhmetov, A.Z. Jetpisbayeva, Y.B. Utepov // Materials. — 2022. — Vol. 15, No. 7. — P. 2648. https://doi.org/10.3390/ma15072648 DOI: https://doi.org/10.3390/ma15072648
Effect of fine fillers from industrial waste and various chemical additives on the placeability of self-compacting concrete / Y. Utepov, D. Akhmetov, I. Akhmatshaeva // Computers and Concrete. — 2020. — Vol. 25, No. 1. — С. 59–65. https://doi.org/10.12989/CAC.2020.25.1.059
Experimental study on rheology, strength and durability properties of high strength self-compacting concrete / S.D. Bauchkar, H.S. Chore // Computers and Concrete. — 2018. — Vol. 22, No. 2. — P. 183–196. https://doi.org/10.12989/CAC.2018.22.2.183
Effect of modifiers and mineral additives from industrial waste on the quality of aerated concrete products / Y. Sabitov, D. Dyussembinov, D. Bazarbayev // Technobius. — 2021. — Vol. 1, No. 4. — P. 0010. https://doi.org/10.54355/tbus/1.4.2021.0010 DOI: https://doi.org/10.54355/tbus/1.4.2021.0010
A review on performance of waste materials in self compacting concrete (scc) / I. Ismail, N. Jamaluddin, S. Shahidan // Jurnal Teknologi. — 2016. — Vol. 78, No. 5. — P. 29-35. https://doi.org/10.11113/jt.v78.8233 DOI: https://doi.org/10.11113/jt.v78.8233
Determination of Optimal Fibre Reinforcement Parameters for Self-Compacting Concretes / D.A. Akhmetov, A. Aniskin, Ye.B. Utepov, Ye.N. Root, G. Kozina // Tehnicki vjesnik - Technical Gazette. — 2020. — Vol. 27, No. 6. — P. 1982–1989. https://doi.org/10.17559/TV-20200630163212 DOI: https://doi.org/10.17559/TV-20200630163212
Effect of low-modulus polypropylene fiber on physical and mechanical properties of self-compacting concrete / D. Akhmetov, S. Akhazhanov, A. Jetpisbayeva, Y. Pukharenko, Y. Root, Y. Utepov, A. Akhmetov // Case Studies in Construction Materials. — 2022. — Vol. 16. — P. e00814. https://doi.org/10.1016/j.cscm.2021.e00814 DOI: https://doi.org/10.1016/j.cscm.2021.e00814
Accounting of influence of quality of concrete raw components and of operating conditions on concrete products durability from the perspective of technical regulation / A. Gubskaya, A. Gapotchenko, T. Volovik // Problemy sovremennogo betona i zhelezobetona. — 2019. — No. 11. — P. 108–124. https://doi.org/10.35579/2076-6033-2019-11-08 DOI: https://doi.org/10.35579/2076-6033-2019-11-08
Interstate standard GOST 10178-85 Portland cement and portland blastfurnace slag cement. Specifications [Electronic resource] / MEGANORM // MEGANORM. — [2021]. — Mode of access: https://meganorm.ru/Index2/1/4294853/4294853156.htm
Interstate standard GOST 30515-2013 Cements. General specifications [Electronic resource] / MEGANORM // MEGANORM. — [2021]. — Mode of access: https://meganorm.ru/Index2/1/4293771/4293771004.htm
Welcome to HeidelbergCement in Kazakhstan [Electronic resource] / HeidelbergCement. — [2022]. — Mode of access: https://kz.heidelbergcement.com/en (accessed date: 29.08.2022).
Central Asia Cement [Electronic resource] / CAC. — [2022]. — Mode of access: https://cac.kz/products/ (accessed date: 29.08.2022).
Standard Cement [Electronic resource] / SC. — [2022]. — Mode of access: http://standard-cement.com/ (accessed date: 29.08.2022).
Interstate standard GOST 310.2-76 Cements. Methods of grinding fineness determination [Electronic resource] / MEGANORM // MEGANORM. — [2021]. — Mode of access: https://meganorm.ru/Index/34/34110.htm
Interstate standard GOST 310.1-76 Cement. Test methods. General [Electronic resource] / MEGANORM // MEGANORM. — [2021]. — Mode of access: https://meganorm.ru/Index2/1/4294853/4294853170.htm
Interstate standard GOST 310.4-81 Cements. Methods of bending and compression strength determination [Electronic resource] / MEGANORM // MEGANORM. — [2021]. — Mode of access: https://meganorm.ru/Index2/1/4294853/4294853167.htm
Interstate standard GOST 6139 Sand for cement testing. Specifications [Electronic resource] / MEGANORM // MEGANORM. — [2021]. — Mode of access: https://meganorm.ru/Index2/1/4293719/4293719479.htm
Downloads
Published
How to Cite
License
Copyright (c) 2022 Khaidi Khonjo, Yerzhan Toleuov, Aizere Azbergenova, Akkumis Urumbayeva
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
