Determination of the softening temperature of bitumen with different modifiers

Authors

DOI:

https://doi.org/10.54355/tbus/2.4.2022.0028

Keywords:

bitumen, modifier, property, softening temperature, investigation

Abstract

Road construction is an important part of economic development, and the most pressing problem is improving the quality of road surfaces. Road pavements are a combination of mineral fillers and bitumen, in which bitumen is used as a durable waterproof binder. Bitumen modification can improve the quality of bitumen, by increasing the plasticity interval, increasing adhesion to metal and mineral materials, increasing resistance to aging, and expanding the operating temperature range.  Softening point characterizes the thermal resistance of bitumen: the transition from the elastic-plastic state to a viscous-fluid state, in which the bitumen loses its adhesive properties. And this paper presented the investigation of the properties of bitumen by modifying it and determining the softening temperature on the device Ring and ball. The analysis of the obtained results of the use of various modifiers, their comparative characteristics, and the formulation of conclusions about the possibility of involving them in the production of bitumen to improve their quality.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Zhanar Kusbergenova, Department of Civil Engineering, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan

Master Student

Gulmira Baizakova, School of Architecture and Construction, Serikbayev East Kazakhstan Technical University, Ust-Kamenogorsk, Kazakhstan

Senior Lecturer

Aleksej Aniskin, Department of Civil Engineering, University North, Varaždin, Croatia

Candidate of Technical Sciences, Assistant Professor

References

ST RK 2534-2014 Bitumen and bituminous binders bitumens oil modified, road Specifications. — 2014. — 30 p.

Development of binder specification parameters based on characterization of damage behavior / T.P. Bahia HU, Zhai H, Zeng M, Hu Y // Journal of the Association of Asphalt Paving Technologists. — 2001. — Vol. 70. — P. 442–470.

Short- and Long-Term Epoxy Modification of Bitumen: Modification Kinetics, Rheological Properties, and Microstructure / A.A. Cuadri, C. Delgado-Sánchez, F.J. Navarro, P. Partal // Polymers. — 2020. — Vol. 12, No. 3. — P. 508. https://doi.org/10.3390/polym12030508 DOI: https://doi.org/10.3390/polym12030508

Polymer modification of bitumen: Advances and challenges / J. Zhu, B. Birgisson, N. Kringos // European Polymer Journal. — 2014. — Vol. 54. — P. 18–38. https://doi.org/10.1016/j.eurpolymj.2014.02.005 DOI: https://doi.org/10.1016/j.eurpolymj.2014.02.005

Bitumen chemical modification by a thermoplastic polymer / D. Ayupov, Y. Khakimullin, R. Kazakulov // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 890, No. 1. — P. 012094. https://doi.org/10.1088/1757-899X/890/1/012094 DOI: https://doi.org/10.1088/1757-899X/890/1/012094

Practical experience with modified bitumen and bituminous binders/ Zh. Kusbergenova, A. Zhankina, T. Mkilima // Technobius. — 2022. — Vol. 2, No. 1. — P. 0013. https://doi.org/10.54355/tbus/2.1.2022.0013 DOI: https://doi.org/10.54355/tbus/2.1.2022.0013

Sustainable Practice in Pavement Engineering through Value-Added Collective Recycling of Waste Plastic and Waste Tyre Rubber / X. Xu, Zh. Leng, J. Lan, W. Wang, J. Yu, Ya. Bai, A. Sreeram, J. Hu — 2021. — Vol. 6, No. 7. — P. 857-867. https://doi.org/10.1016/j.eng.2020.08.020 DOI: https://doi.org/10.1016/j.eng.2020.08.020

Performance of porous asphalt containing modificated buton asphalt and plastic waste / D.S. Mabui, M.W. Tjaronge, S.A. Adisasmita, M. Pasra — 2020. — Vol. 65, No. 18. — P. 118–123. https://doi.org/10.21660/2020.65.67196 DOI: https://doi.org/10.21660/2020.65.67196

Effect of Waste Polyethylene and Wax-Based Additives on Bitumen Performance / L. Desidery, M. Lanotte // Polymers. — 2021. — Vol. 13, No. 21. — P. 3733. https://doi.org/10.3390/polym13213733 DOI: https://doi.org/10.3390/polym13213733

Elastomernyj modifikator neftyanyh bitumov i elastomerno-bitumnoe vyazhushee na ego osnove: pat. RU 2701026 / S.E. Shakhovec; publ. 2019.

EN 1427:2015 Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method. — 2015. — 18 p.

Rasshirenie temperaturnogo intervala nadezhnoj raboty gidroizolyacionnyh materialov / N.V. Horuzhaya // Molodoj uchenyj. — 2009. — Vol. 7, No. 7. — P. 33-36.

Downloads

Published

2022-12-12

How to Cite

Kusbergenova, Z., Baizakova, G. ., & Aniskin, A. (2022). Determination of the softening temperature of bitumen with different modifiers. Technobius, 2(4), 0028. https://doi.org/10.54355/tbus/2.4.2022.0028

Issue

Section

Articles

Categories