Practical experience with modified bitumen and bituminous binders

Authors

DOI:

https://doi.org/10.54355/tbus/2.1.2022.0013

Keywords:

bitumen, test, safety, road pavement, mixture

Abstract

To date, the issue of polymer waste recycling becomes relevant, because every year the amount of plastic and polyethylene waste increases, which leads to devastating effects on flora and fauna everywhere. One of the ways to solve this problem of polymer waste recycling is to use them to modify asphalt-concrete mixture and bitumen. Thus, two problems are solved at once: reuse of plastic, polyethylene, and other polymer wastes and improvement of asphalt concrete pavement with an increase in its service life. The paper presents a discussion of the use of modified bitumen in the construction of highways and roads, the design and technological solutions, features of the technology of modified bitumen, as well as the results of laboratory tests of modified bitumen, based on which was decided on the advisability of using. The use of the combined approach of the road pavement allows increasing the service life of the road.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Zhanar Kusbergenova, Department of Civil Engineering, L.N. Gumilyov Eurasian National University, Nur-Sultan, Kazakhstan

Master Student

Aizhan Zhankina, Department of Civil Engineering, L.N. Gumilyov Eurasian National University, Nur-Sultan, Kazakhstan

PhD Student

Timoth Mkilima, Ardhi University, Plot Number 3 Block L, Observation Hill, P. O. Box 35176, Dar Es Salaam, Tanzania

Research Fellow

References

Polymer modified bitumen: properties and characterisation: Woodhead Publishing in materials. — Oxford: WP, Woodhead Publ, 2011. — 404 p.

The Shell Bitumen Handbook / R.N. Hunter, A. Self, J. Read. — London, UK: ICE Publishin, 2015. — 761 p.

Effect of Waste Polyethylene and Wax-Based Additives on Bitumen Performance / L. Desidery, M. Lanotte // Polymers. — 2021. — Vol. 13, No. 21. — P. 3733. https://doi.org/10.3390/polym13213733 DOI: https://doi.org/10.3390/polym13213733

Performance of porous asphalt containing modificated buton asphalt and plastic waste / D. S. Mabui, M. W. Tjaronge, S. A. Adisasmita and Mubassirang Pasra // International Journal of GEOMATE. — 2020. — Vol. 18, No. 65. — P. 118–123. https://doi.org/10.21660/2020.65.67196 DOI: https://doi.org/10.21660/2020.65.67196

Sustainable Practice in Pavement Engineering through Value-Added Collective Recycling of Waste Plastic and Waste Tyre Rubber / X. Xu, Z. Leng, J. Lan, W. Wang, J. Yu, Y. Bai, A. Sreeram, J. Hu // Engineering. — 2021. — Vol. 7, No. 6. — P. 857–867. https://doi.org/10.1016/j.eng.2020.08.020 DOI: https://doi.org/10.1016/j.eng.2020.08.020

Polymer modified asphalt binders / Y. Yildirim // Construction and Building Materials. — 2007. — Vol. 21, No. 1. — P. 66–72. https://doi.org/10.1016/j.conbuildmat.2005.07.007 DOI: https://doi.org/10.1016/j.conbuildmat.2005.07.007

Using Mineral Fibers to Improve Asphalt and Asphalt Mixture Behavior / L. Zhao, J. Chen, S. Wang // Traffic and Transportation Studies 2010. — Reston, VA: American Society of Civil Engineers, 2010. — P. 1352–1360. https://doi.org/10.1061/41123(383)129 DOI: https://doi.org/10.1061/41123(383)129

FM analysis of aging properties of UV531/SBS modified bitumen / F. Zhengang, C. Fengjie, Y. Dongdong, L. Xinjun // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 758, No. 1. — P. 012068. https://doi.org/10.1088/1757-899X/758/1/012068 DOI: https://doi.org/10.1088/1757-899X/758/1/012068

Rheological behavior of recycled polyethylene modified bitumens / E.S. Okhotnikova, I.N. Frolov, Yu.M. Ganeeva, A.A. Firsin, T.N. Yusupova // Petroleum Science and Technology. — 2019. — Vol. 37, No. 10. — P. 1136–1142. https://doi.org/10.1080/10916466.2019.1578796 DOI: https://doi.org/10.1080/10916466.2019.1578796

Investigation of the Effect of Adhesive Additive on the Plasticity of Road Bitumen and Physical-Mechanical Properties of the Road Concrete Mix / Mukhamatdinov I. I. // Chemistry for Sustainable Development. — 2021. — No. 1. — P. 86-97. https://doi.org/10.15372/CSD2021281 DOI: https://doi.org/10.15372/CSD2021281

Development of binder specification parameters based on characterization of damage behavior / T.P. Bahia HU, Zhai H, Zeng M, Hu Y // Journal of the Association of Asphalt Paving Technologists. — 2001. — Vol. 70. — P. 442–470.

Institutional Support to the National Quality Center for Road Assets [Electronic resource] / ADB. — [2020]. — Mode of access: https://www.adb.org/projects/54092-001/main (accessed date: 25.02.2021).

Working Project «Big Almaty Ring Road Construction» Survey Materials, Geological Report // «Research and Manufacturing Company Kazdorinnovaciya» LLP, Almaty. — 2019.

ST RK 2534-2014 Bitumen and bituminous binders. Petroleum bitumen modified, for road surface. Specifications. — 2001. — 30 p.

Downloads

Published

2022-03-17

How to Cite

Kusbergenova, Z., Zhankina, A., & Mkilima, T. (2022). Practical experience with modified bitumen and bituminous binders. Technobius, 2(1), 0013. https://doi.org/10.54355/tbus/2.1.2022.0013

Issue

Section

Articles

Categories