Cement-reduced ternary concrete with fly ash and silica fume for irrigation canal structures: computational mix design with single-composition experimental verification

Authors

DOI:

https://doi.org/10.54355/tbus/27897338.6.4.2026.0111

Keywords:

ternary cementitious system, fly ash, silica fume, irrigation canal concrete, particle packing, Bolomey model, Powers model, capillary porosity, industrial by-product utilization

Abstract

Irrigation canal linings in Kazakhstan face freeze-thaw cycling, sulfate-bearing water, and abrasive sediment flow, while national programs to rehabilitate more than 14,000 km of canals create sustained demand for lower-clinker concrete. This study computationally designs a cement-reduced ternary binder (CEM I 42.5N, Ekibastuz low-calcium fly ash, and DSF-95 silica fume, 70:20:10 by mass) that replaces 30% of the cement in a plant control mixture (280 vs 400 kg/m3) while preserving total binder content, paste volume, and aggregate skeleton. The design combines particle-packing simulation, a modified Bolomey model calibrated on the measured plant control (R28 = 44.5 MPa), and Powers-model porosity. Experimentally, a laboratory composition with the same ternary binder proportions was cast and tested in 100 mm cubes, yielding a measured R28 of 52.8 MPa versus 52.6 MPa predicted (0.4% deviation); its fracture surface was examined by scanning electron microscopy. The predicted ternary mixture reaches R28 = 55.2 MPa (+24% over the control, attributable to the lower water content and the assumed packing bonus; mean-based class B40) with a 28-day capillary porosity of 0.160 versus 0.223 (−28%), lowering the paste-permeability index to about one-third of the control’s, and utilizes 120 kg of industrial by-products per cubic meter while avoiding at least 72 kg of binder-related CO2. The GOST durability grades (frost resistance, water impermeability, abrasion, sulfate resistance) are deliberately not predicted and await the ongoing laboratory campaign; the work is therefore a computational mix-design study with a single measured verification composition.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Daniyar Akhmetov, Department of Construction and Building Materials, Satbayev University, Almaty, Kazakhstan

Doctor of Technical Sciences, Professor

Khrystyna Moskalova, Development and Training Centre for the Metal Industry – Metal Centre Čakovec, Čakovec, Croatia

PhD, Assistant Professor

References

“Annual Results: Water Infrastructure Development and Technology Implementation for Sustainable Future of Kazakhstan,” Official Information Source of the Prime Minister of the Republic of Kazakhstan. Accessed: Sep. 20, 2026. [Online]. Available: https://primeminister.kz/en/news/reviews/annual-results-water-infrastructure-development-and-technology-implementation-for-sustainable-future-of-kazakhstan-29470

“Kazakhstan advances modernization and digitalization of the water sector with support from international partners,” UNDP Kazakhstan. Accessed: Sep. 25, 2026. [Online]. Available: https://www.undp.org/kazakhstan/press-releases/kazakhstan-advances-modernization-and-digitalization-water-sector-support-international-partners

“Kazakhstan’s Irrigation Overhaul: Less Waste, Better Harvests,” World Bank Group.

А. М. Imanov, Zh. N. Moldamuratov, O. D. Seitkazinov, A. Z. Tukhtamisheva, A. B. Ismailova, and G. М. Rakhimova, “Enhanced operational reliability of irrigation canals through the application of modified concrete,” Nanobuild, vol. 17, no. 6, pp. 678–696, 2025, doi: 10.15828/2075-8545-2025-17-6-678-696. DOI: https://doi.org/10.15828/2075-8545-2025-17-6-678-696

“GNR 2.0 – GCCA in Numbers,” GCCA. Accessed: Sep. 25, 2026. [Online]. Available: https://gccassociation.org/gnr/

“Cement. Production, energy demand and emissions,” IEA. Accessed: Sep. 25, 2026. [Online]. Available: https://www.iea.org/energy-system/industry/cement

“Cement and Concrete Industry Net Zero Action and Progress Report,” GCCA. Accessed: Sep. 25, 2026. [Online]. Available: https://gccassociation.org/cement-and-concrete-industry-net-zero-action-and-progress-report/

M. D. A. Thomas, M. H. Shehata, S. G. Shashiprakash, D. S. Hopkins, and K. Cail, “Use of ternary cementitious systems containing silica fume and fly ash in concrete,” Cement and Concrete Research, vol. 29, no. 8, pp. 1207–1214, Aug. 1999, doi: 10.1016/S0008-8846(99)00096-4. DOI: https://doi.org/10.1016/S0008-8846(99)00096-4

Z. Zhumadilova et al., “Rheological, Thermal, and Microstructural Behavior of Cementitious Systems with Silica Fume and Fly Ash for Self-Compacting Concrete,” J. Compos. Sci., vol. 10, no. 7, p. 341, Jun. 2026, doi: 10.3390/jcs10070341. DOI: https://doi.org/10.3390/jcs10070341

A. Tolegenova, G. Skripkiunas, L. Rishko, and K. Akmalaiuly, “Air‐Entraining Effect on Rheological Properties of Cement‐Based Mixtures,” Advances in Materials Science and Engineering, vol. 2024, no. 1, p. 5018973, Jan. 2024, doi: 10.1155/2024/5018973. DOI: https://doi.org/10.1155/2024/5018973

A. Lekhya and N. S. Kumar, “A study on the effective utilization of ultrafine fly ash and silica fume content in high-performance concrete through an experimental approach,” Heliyon, vol. 10, no. 22, p. e39678, Nov. 2024, doi: 10.1016/j.heliyon.2024.e39678. DOI: https://doi.org/10.1016/j.heliyon.2024.e39678

“GOST 25818-2017 Thermal plant fly-ashes for concretes. Specifications,” Moscow, Russia: Standardinform, 2017, p. 19.

ASTM C618-23e1 Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, Philadelphia, PA, USA., 2023. doi: 10.1520/C0618-23E01. DOI: https://doi.org/10.1520/C0618-23E01

ASTM C1897-20 Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements, Philadelphia, PA, USA., 2020. doi: 10.1520/C1897-20. DOI: https://doi.org/10.1520/C1897-20

“GOST R 58894-2020 Silica Fume for Concretes and Mortars. Specifications,” Moscow, Russia: Standardinform, 2020, p. 19.

W. M. Visscher and M. Bolsterli, “Random Packing of Equal and Unequal Spheres in Two and Three Dimensions,” Nature, vol. 239, no. 5374, pp. 504–507, 1972, doi: 10.1038/239504a0. DOI: https://doi.org/10.1038/239504a0

A. H. M. Andreasen, “Ueber die Beziehung zwischen Kornabstufung und Zwischenraum in Produkten aus losen Körnern (mit einigen Experimenten),” Kolloid-Zeitschrift, vol. 50, no. 3, pp. 217–228, 1930, doi: 10.1007/BF01422986. DOI: https://doi.org/10.1007/BF01422986

J. E. Funk and D. R. Dinger, Predictive Process Control of Crowded Particulate Suspensions. Boston, MA: Springer US, 1994. doi: 10.1007/978-1-4615-3118-0. DOI: https://doi.org/10.1007/978-1-4615-3118-0

J. Bolomey, “Granulation et prévision de la résistance probable des bétons,” Travaux, vol. 19, no. 30, pp. 228–232.

“EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity,” Brussels, Belgium: CEN, 2016, p. 102.

V. G. Papadakis and S. Tsimas, “Supplementary cementing materials in concrete,” Cement and Concrete Research, vol. 32, no. 10, pp. 1525–1532, 2002, doi: 10.1016/S0008-8846(02)00827-X. DOI: https://doi.org/10.1016/S0008-8846(02)00827-X

Fib, fib Model Code for Concrete Structures 2010, 1st ed. Wiley, 2013. doi: 10.1002/9783433604090. DOI: https://doi.org/10.1002/9783433604090

T. C. Powers and T. L. Brownyard, “Studies of the Physical Properties of Hardened Portland Cement Paste,” JP, vol. 43, no. 9, pp. 249–336, 1946, doi: 10.14359/15302. DOI: https://doi.org/10.14359/15302

T. C. Powers, “Structure and Physical Properties of Hardened Portland Cement Paste,” Journal of the American Ceramic Society, vol. 41, no. 1, pp. 1–6, 1958, doi: 10.1111/j.1151-2916.1958.tb13494.x. DOI: https://doi.org/10.1111/j.1151-2916.1958.tb13494.x

“GOST 10180-2012 Concretes. Methods for strength determination using reference specimens,” Moscow, Russia: Standardinform, 2012, p. 36.

“EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings,” Brussels, Belgium: CEN, 2004, p. 225.

“GOST 10060-2012 Concretes. Methods for determination of frost-resistance,” Moscow, Russia: Standardinform, 2018, p. 24.

“GOST 12730.5-2018 Concretes. Methods for determination of water tightness,” Moscow, Russia: Standardinform, 2019, p. 19.

“GOST 13087-2018 Concretes. Methods of abrasion test,” Moscow, Russia: Standardinform, 2018, p. 16.

“GOST 31384-2017 Protection of concrete and reinforced concrete structures against corrosion. General technical requirements,” Moscow, Russia: Standardinform, 2018, p. 49.

ASTM C1138M-19 Test Method for Abrasion Resistance of Concrete (Underwater Method), Philadelphia, PA, USA., 2019. doi: 10.1520/C1138M-19. DOI: https://doi.org/10.1520/C1138M-19

ASTM C457/C457M-24 Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete, Philadelphia, PA, USA., 2024. doi: 10.1520/C0457_C0457M-24. DOI: https://doi.org/10.1520/C0457_C0457M-24

“GOST 18105-2018 Concretes. Rules for control and assessment of strength,” Moscow, Russia: Standardinform, 2018, p. 15.

Downloads

Published

2026-11-15

How to Cite

Baikhojayeva, Z., Akhmetov, D., & Moskalova, K. (2026). Cement-reduced ternary concrete with fly ash and silica fume for irrigation canal structures: computational mix design with single-composition experimental verification. Technobius, 6(4), 0111. https://doi.org/10.54355/tbus/27897338.6.4.2026.0111

Issue

Section

Articles

Categories

Most read articles by the same author(s)